Our 1939 gas tank caps contain a needle valve with a coil spring to hold it in position. In some...
439 MAGNETOS The ground wire running from the breaker bar assembly to the body of the magneto to insure e...
DRY PUSH RODS, TAPPETS AND VALVE ASSEMBLY 339 The crankcase vacuum plays a very important part in the lubrication of...
CARBURETOR FLOAT LEVER AND NEEDLE VALVE ADJUSTMENT If too much play has developed between the three fingers of the float...
Clutch Control Cable Flexible Casing Engineering Change Memorandum No: 1-249-1
Engineering Memorandum 1-249-8 Gear Tooth Pressure Angle
Motor & Serial Numbers 5/26/1948
INSTRUCTIONS FOR INSTALLING PRIMARY DRIVE CHAIN ADJUSTER KIT, NO. 1540026 Remove the primary drive case cover, clutch, chain, motor sprocket,...
SUBJECT: CYLINDER HEAD GASKET’S, M0DEL 350-351 When installing new cylinder head gaskets on the Model 350 and 351 Chief, the...
Service Bulletin 1-249-3A Front Fork Oil Seals
