JUNIOR SCOUT MOTOR SPROCKET DRIVE SHAFT AND CRANKCASE BUSHINGS The motor sprocket and flywheel main drive shaft is fitted to...
A groove 1/32 deep and 1/16 wide is being ground lengthwise on the front and rear intake valve crankcase push...
Our 1939 gas tank caps contain a needle valve with a coil spring to hold it in position. In some...
439 MAGNETOS The ground wire running from the breaker bar assembly to the body of the magneto to insure e...
DRY PUSH RODS, TAPPETS AND VALVE ASSEMBLY 339 The crankcase vacuum plays a very important part in the lubrication of...
CARBURETOR FLOAT LEVER AND NEEDLE VALVE ADJUSTMENT If too much play has developed between the three fingers of the float...
