INDIAN COMMANDER HORN BRACKETS
It will be necessary to assemble 1/4″ flat washers between the hex studs and the spring plate to prevent breakage of the bracket. Assemble the smooth side of the washer down against the spring plate. Remove burrs from the end of the hex studs with a file.
Flat 1/4″ washers are being supplied with all Indian Commander horns at the present time.
Any brackets that fail may be returned to our Service Department for adjustment, with Form M-709 filled in.
Order replacement brackets (Part No. 231005) on Accessory order blanks.
Walter Brown
Service Manager
