MODEL “B” CHEK HEADLIGHT BULB ADAPTER TO ACCOMMODATE
MODEL “A” CHEK AMERICAN MADE BULBS
- Drill or ream hole in $37517 washer to 39/64″.
- Insert two blades in hacksaw and cut slots “A” and “B” as shown on sketch.
- Place washer between socket body and spring clips, insert bulb with two #763004 rubber seals.
- Line up bulb terminals with spring clips and solder washer in place.
- American made 12-16 volt bulbs may be used with “choke coil” described in Service Shot 193.
Walt Brown
Service Manager
